LapAR Setup manual (1st Generation)

Welcome to the step-by-step assembly guide for the LapAR. Whether you prefer step-by-step instructions or a video demonstration, this guide will walk you through the assembly process.

Before you begin, take a moment to review the package's contents and acquaint yourself with the included components. The following content has been crafted to provide you with all the insights required to transform individual parts into a functional and invaluable tool for honing your surgical skills.

Step 1

When opening your simulator it is recommended that you unpack all package contents and arrange them before starting construction.

Step 2

Now take the following parts:

Step 3

Screw into place 2x MA01 using 2x M5B24 and 2x WN14

Step 4

Repeat the last two steps with the same parts on the front panel AR20_U01 as shown in the image.

Step 5

Take 4x AR20_M-BKT, position them in the keys provided.

Step 6

Using 4x M5B24 screw each AR20_M-BKT into position on the base.

Step 7

At this stage the simulator should look exactly like the reference image.

Step 8

Locate the following parts:

Step 9

Now attach 3x WN14 to the bolts coming through the bottom surface.

Step 10

Remove the AR20_CAM from its packaging and place into position as shown.

Step 11

Take 2x M5B24 bolts and affix the AR20_CAM into position.

Step 12

Take the sub-assembly from the last four steps and place it over the upright panel of the simulator as shown.

Step 13

Using 4x MA01, 4x WN14 & 4x M5B24, repeat the process from steps 2,3 & 4.

Step 14

It is important to note that the simulator is capable of multiple platform positions.

Step 15

You will use the flat platform for LapPass® and any other non-AR tasks.

Step 16

Snap into place both side panels and move on.

Step 17

Connect the USB micro into the back of the camera.

Step 18

Connect the other end of this cable into your Laptop or PC. You will have received a link from us shortly after purchase. Follow this to download the software platform required.